Masonry requirements for cement kiln refractory bricks
Brick lining should be close the kiln body. Brick cold end of the "four corners onto the floor". Big head and kiln body should be very close, no gap. Brick by strict, straight stitch, cross-ring, lock brick, good bit. To ensure that the tire ring and the cylinder is reliable and concentric, kiln lining structure is stable. So that the cylinder on the brick ring pressure and brick lining the internal stress evenly distributed in the lining of each brick, To prevent stress concentration. Masonry special attention: Do not mistake the big head or small head of
fire bricks during masonry. Even one mistake will cause big accident